There are many things to pay attention to in the high temperature maintenance of the hammer crusher in summer: the spread of high temperature and the hot smell of "hot people" not only affect people's daily life, but also bring many problems to the use of the hammer crusher. Here, the editor reminds all users to protect against high temperatures, while ensuring the personal safety of construction personnel. High temperature will cause many uncertain factors, which will affect the normal operation of the equipment. How to avoid the impact of summer high temperature on the crusher, we can start from the following points:

First of all, during the production period, the staff should regularly check the viscosity of the lubricating oil to see whether it meets the specified requirements, check the cooling system, and whether the fuel system is unblocked. Secondly, check whether the wires, plugs, tubing, screws and other parts of the hammer crusher are aged and worn. If the above situation occurs, it needs to be dealt with in time. As long as the cleanliness of the body is maintained, the oil, dust and other impurities on the body of the equipment must be cleaned in time to make it in a good production state.

There are many things to pay attention to in the high temperature maintenance of the hammer crusher in summer. If you have any trouble about the high temperature maintenance of the crusher in summer, you can contact us at any time and we will try our best to help you solve it. When using crusher equipment, the motor will be very hot. Generally speaking, customers will think this is normal and can be ignored, but often because it is ignored, it may cause other problems with the device, so the root cause of the problem cannot be found.

The following hammer crusher manufacturers analyze a little knowledge about the motor: First, when purchasing a hammer crusher, the crusher model must match the motor. If the motor is small or very large, it will easily fail, such as heating or even burning the motor. Second, don't underestimate the crusher. Installation, a good start is a successful step, the installation of the crusher should be installed and debugged under the guidance of professionals; In addition, the blades of the hammer crusher fan will fall off or wear and cause the heat of the crusher motor. At this time, we have to check whether the motor fan blades are off or worn, and the problem should be dealt with in time; in addition, the motor power of the hammer crusher is too large, which will produce excessive wind speed. When the wind speed is too low, the outlet is blown back, resulting in output. Low, repeatedly returning to the furnace and repeatedly destroying the material will cause the crusher motor to heat up. If the motor voltage is too low, the load of the motor will increase, and abnormal heating will occur.