Crusher equipment is used to crush materials. After purchasing the crusher equipment, daily maintenance work should be carried out, which can increase the service life of the crusher. In the daily operation of the equipment, good operating habits and post-operation Maintenance work can increase the service life of the equipment. Today I will explain the daily maintenance work of the crusher accessories.

When crushing stone materials, choose suitable materials for crushing according to the performance of the crusher. If the crushed materials are too soft or too hard, they will wear out the parts of the crusher equipment, especially in the sand production line. The materials are more complicated, so we need to pay attention to this aspect.

In addition, before crushing the materials, the materials should be simply screened, so as to prevent the content of medium and fine powder from being too high when the materials are crushed, so screening needs to be carried out. If there is too much fine powder, in the crushing process It will affect the conveying speed. If the fine powder adheres to the conveyor belt, it will cause the material feeding speed to slow down.

If you encounter materials that need to be crushed, you need to look at the viscosity, humidity, temperature, etc. of the crushed materials. Then you need to choose a crusher according to the situation. Different crushers can crush different materials differently, so according to the size of the water content of the material, The temperature difference of the material and the viscosity of the material are used to select different crusher types.

When purchasing crusher equipment, you can’t just look at the performance, appearance and price of the crusher. In fact, it still depends on the quality of each part of the crusher. To choose a good crusher, you must choose good quality and wear resistance. High accessories, so that the equipment can be effective.

After the material is crushed, the particle size of the finished product will also affect the service life of the crusher. When the particle size required for the material is finer, the wear on the accessories of the crusher is greater. When the particle size of the material required is finer, Then the more friction between the material and the accessories, the greater the wear.