The crusher equipment used in the sand production line includes:
The emergence of the sand production line solves the current situation of the exhaustion of natural sand resources that cannot be regenerated. Artificial sand is made by crushing stones to a certain size with crushing equipment. So which crusher equipment is the sand production line composed of?

Next, let’s take a look at the equipment used in the sand production line: vibrating feeder, jaw crusher, impact crusher, sand making machine, vibrating screen, sand washing machine, and the transportation of stones in each part. Belt conveyors.

The function of the vibrating feeder in the stone production line is to transport the stone evenly and continuously, so that the stone is not easy to be irregular and cause broken blockage. The role of jaw crusher and impact crusher in the stone line is to play coarse and fine breaking, so that the fineness of the stone is more uniform.

The sand making machine is the most critical machine in the sand making production line. It determines the fineness of the finished sand required. The vibrating screen is responsible for screening out the finished stone we need. The sand washing machine is responsible for washing away impurities in the sand. Among them, depending on the output of finished sand required for production, the required mechanical model configuration is also different. Of course, these equipment are necessary equipment, and there will be some additional equipment, especially some customer sites are different, which will also cause some differences in sand making equipment, site design, equipment configuration, program launch, we must consider every detail .

Specific process of sand production line:
The stones stored in the silo are transported to the vibrating feeder first, and the irregularly large and small stones are transported to the jaw crusher at a uniform speed by the vibrating feeder for coarseness crushing, and then into the impact crusher The coarse material is further finely crushed. At this time, the stone material is only equivalent to the stone with a relatively small diameter. If you want to crush it into the finished sand we need, it must go through the sand making machine. The fineness of the crusher of the sand making machine The required fineness of the finished sand can be achieved. According to the required fineness of the finished sand, the range of the discharge port of the sand making machine can be adjusted, and then sieved by the vibrating screen. The sand was washed by the sand washer to remove the sand. Impurities, finally, is the finished sand we need (the intermediate sand and gravel material is conveyed by a belt conveyor, and the length and width of the belt conveyor are determined according to the output).